Precision Stamping Self-Service Cash Withdrawal All-In-One Device Core Module

SaveSavedRemoved 0

Control Module

Material: Stainless Steel
Process: Metal Stamping And Mold Making
Stamping Size: Custom Size
Stamping Type: Metal Forming
Stamping Mold: Compound Mold
Tolerance: Custom
Fine Blanking Method: Multi-Station
Surface Treatment: Custom

Electronic | Stainless Steel | Telecom

High-Quality Precision Stamping Self-Service Cash Withdrawal All-In-One Device Core Module

The metal stamping part of the combination plate shown is a precision part with beautiful appearance, excellent mechanical performance and strong bonding performance designed by Be-cu Company for the movement module of the self-service deposit and withdrawal machine . This case studies mainly shows the parameters, process and some common problems of this part from various aspects. Be-cu.com is a solution that integrates the design, research and development, production and optimization of precision stamping parts in multiple fields..This component has the following characteristics:

Aesthetics, the surface is treated with environmentally friendly nickel plating, and the appearance is bright and shiny;
The performance is stable, and the processing of opening and tapping is carried out in many places to facilitate assembly.
It is convenient to update and iterate. The product is mass-customized, and when the function is updated, the cost of batch update of structural parts can be effectively reduced;
Quality assurance, Be-cu.com are based on quality, all employees participate in the inspection, and the pass rate of precision stamping products reaches 98% ;
Rigorous, the components have been optimized by 4 designers, and the bending angles and the positions and sizes of special-shaped holes have been tested and adjusted many times to ensure their assembly performance;

Note: More detailed photos of the products at the bottom of the page are used to show the product features of the metal stamping parts of the combined plate.

The Parameters Of Precision Stamping Self-Service Cash Withdrawal All-In-One Device Core Module

Product Size	135.79318mm	Expand Size	178.796.31mm
Product Material	SPCC (cold rolled sheet)	Material Thickness	1.0mm
Product Weight	143.8g	Mold Type	Single die & compound die, 9 sets in total
Surface Treatment	Environmentally friendly nickel plating	Processing Difficulty	complex
Size Tolerance	±0.1mm	Angle Tolerance	±0.3°

The Production Process Of Precision Stamping Self-Service Cash Withdrawal All-In-One Device Core Module

Serial Number	Process	Punch Tonnage	Process Description And Precautions
1	Composite Blanking	60 T	The shape and prototype hole of the product are punched out at one time, and at the same time, the size requirements of the product and the burr height requirements of the product can be guaranteed;
2	Beer Hole	60T	Punch out the holes in all positions of the product at one time;
3	Hit The Front	60T	Remove burrs around blanking parts, control errors and surface quality;
4	Flip Pig’s Mouth, Convex Rice, Countersunk Hole	60T	There are 3 processes in the stroke, and all of them are secondary processing of the position, and the hole error is closely related to the mold accuracy;
5	Teeth	4-M3	Tapping the 4 special holes, pay attention to the deviation of the vertical angle of the holes, and the deviation of the size of the holes is less than or equal to 0.1mm;
6	L Song	60T	The first L-curve stamping;
7	L Song	60T	For the second L-curve stamping , the L-curve of the part is performed through the mold, and the angle requirements will be higher and the processing efficiency will be higher;
8	V	60T	For the first V-curve stamping, because the product forming is very complex, each forming should be separated separately to reduce the dimensional error ;
9	V	60T	The second V bending forming;
10	V	60T	The last stamping and bending process;
11	Surface Treatment	Auxiliary Process	The surface is treated with environmentally friendly nickel plating;
12	Quality Inspection	Auxiliary Process	Comprehensively check the dimensional error of the product and whether the appearance requirements after surface treatment are qualified;
13	Package	Auxiliary Process	The packaging engineer designs an exclusive packaging scheme to ensure the qualified quality of the combined plate stamping parts in the subsequent operation process and avoid losses;

Why Choose Our Precision Stamping Self-Service Cash Withdrawal All-In-One Device Core Module Service?

Are Cost-Efficient
Manufacture Parts That Are Precision-Built
Expert-Level Consultation and Design Assistance
Provide Free Tool & Die Insert Storage and Maintenance
Offer Complete In-House Tool & Die Capabilities
BE-CU And His Core Supplier Sipx has large to small precision stamping presses. Our presses range from 40 to 700 tons, with bed sizes up to 150 inches and speeds up to 400 strokes per minute.
Specializing in automated precision progressive dies, our feed capability ranges from 0.008 to 0.375 inch thick material with coil widths up to 50 inches and weights to 15,000 pounds.

Advanced Equipment to Create a Diverse Range of Designs,Sizes, and Thicknesses Large or Small Parts Can Be:

– Pierced
– Formed
– Drawn
– Extruded
– Marked
– And More!

Expert-Level Consultation and Design Assistance including:

Engineering drawing analysis
Design feasibility reviews
Functionality assessments
Confirmation of supply tolerances, cost ratios, and other important project considerations
Informed recommendations about when to use stamping versus other technologies

Contact Be Cu Now for your Custom Metal Stamping, We are your best online Stamping services choice!

Specifications of Precision Stamping Self-Service Cash Withdrawal All-In-One Device Core Module

Raw Material Thickness	0.040″ to 0.375″
Material	Stainless Steel (304, 305, 316, 430 & 434), Aluminum (3003, 5052, 6061), Cold Rolled Steel (1008, 1010), High Carbon Steel (1035), Nickel and Pre-plated Steel, Galvannealed Steel, Brass (80-20, 80-15, 70-30), Copper, HSLA.
Presses Ranging	40 to 700 tons
Stamping Process	Flanging, punching, bending, necking, trimming, deep drawing, cold extrusion, precision blanking, bulging
Quality Control	Material Analysis、Hardness Testing、Mechanical Testing、Magnetic Particle Inspection、X Ray Testing、Leakage Testing、Ultrasonic Inspection
Surface Treatment	Powder coating,Nickel plating,Anodic oxidation,Chrome plating,Yellow zinc plated,Electroless nickel plating,Chemical conversion coating,Zinc plating,Electroplating,etc
Customized Drawings	2D:DWG,DXF,PDF & 3D:ASM,IGS,STEP,STP .ETC

The Common Problems Of Precision Stamping Self-Service Cash Withdrawal All-In-One Device Core Module

1.In addition to metal stamping processing, what supporting services does your company have ?

A: Our company also has the following production services:

First, the stamping die is made, and the precision of the die is required to be ± 0.01mm ;

Second, the sheet metal processing workshop provides diversified production services;

Third, assembly, there are currently 4 assembly production lines, and the current product projects are Luxshare’s 5G antenna, Guangdian Express’s integrated cabinet, BYD’s battery casing, etc.;

With the increasing market demand, our company continues to enrich its own technical foundation to meet the diverse product needs of customers.

Be-cu.com has been active in foreign advanced production equipment and training high-end technical talents for many years, laying a solid foundation, aiming to contribute more strength and scientific research and technical support in promoting the upgrading of China’s precision and intelligent manufacturing!

2. In addition to combining plate metal stamping parts, can you also customize complex metal stamping parts of other components ?

Answer: Be-cu.com undertakes precision metal stamping parts for customized product parts, such as shell metal stamping parts, upper cover metal stamping parts, side plate metal stamping parts, etc. ” product demand.

Not only that, the company has also set up a special R&D team to provide customers with optimized solutions for product structural parts, such as product assembly, space utilization, performance improvement, software and hardware integration, etc.

The Detail Of BE-CU Metal Stamping Company

Been a China based Metal Stamping Company an important part of our business is short runs and small quantities of customized shapes which include but is not limited to building & construction, transportation, consumer goods, packaging and engineering products.

BE-CU.COM is a China based manufacturer offering Metal Forming services. Our plant specializes in Stamped Metal parts, post machining services and plating or painting. We press a comprehensive range of standard and complex custom shapes and some very challenging designs. With number of processes under one roof we manufacture all sort of products and offer assembly services.Your part drawings will be reviewed in house by be-cu engineers. The press will be designed around the profile according to the intended use for the metal part. Some design considerations, such as wall thickness, tolerances ant type of the metal may need to be taken into account. Off-tool samples will be provided to you after drawings are approved and tool been made.Our team of assemblers specialize in mechanical and electrical assembly of components. We are experienced with a large variety of assembly from simple one or two part additions to complete complex cabinets and assemblies. Additional services also include but not limited to Powdercoating, Plating, E-Coating, General Engineering and custom packaging.