Silicon Nitride Ceramic CNC Machining Factory

First of all, if we want to buy high-quality ceramic products from manufacturers or online, we also want to know whether this manufacturer is good or not, and whether it is a manufacturer worthy of our trust.

We must first check the machining equipment of this machining manufacturer. This is mainly because the hardness of silicon nitride ceramics is too hard. Generally, the equipment for machining metal cannot be processed, and advanced equipment specially used for machining ceramics is required.

However, it is not enough for us to know this. We also need to know that they use Whether it is pure silicon nitride, because only pure silicon nitride has its heat dissipation performance up to international standards. Then we also need to know the word-of-mouth brand of the manufacturer and see what the annual sales volume of the manufacturer is.

After we understand these clearly, we can judge whether the manufacturer is credible. As a professional manufacturer of silicon nitride ceramics,Be-Cu Ceramics has first-class machining technology and machining equipment, rich experience, and a group of elite teams with very rich strength. Be-Cu Ceramics can process various special ceramics of different materials.  

Silicon Nitride Ceramic CNC Machining

When we are looking for a machining manufacturer to customize or buy materials directly, we must first check the machining equipment of the manufacturer to see if their machining equipment is advanced equipment imported from abroad, but these are often not enough. We also need to know the detailed information of the machining plant. Only by knowing the detailed information of the manufacturer can we effectively judge whether the manufacturer is worthy of our trust.

The machining technology of silicon nitride ceramic circuit boards is very complicated during the production process. The surface treatment of silicon nitride ceramic circuit boards can also be called grinding. Its function is to remove the attachments on the surface to improve the flatness of the silicon nitride ceramic circuit board.

Silicon nitride ceramic mechanical substrate: select silicon nitride ceramic parts specially used for flexible circuit boards, which can be solved by surface metallization according to titanium metal. , Wear resistance, strong corrosion resistance.

At present, with the continuous progress of basic research and new technology development of ceramics in my country, especially the improvement of the preparation technology of complex parts and large parts, silicon nitride ceramic materials will be more widely used as engineering materials with excellent performance. Be-Cu Ceramics is a factory specializing in machining silicon nitride ceramics. It has a complete set of machining ceramic equipment and is also first-class in machining technology. Be-Cu Ceramics specializes in machining silicon nitride, silicon nitride, alumina, zirconia, silicon carbide, and aluminum base. 

About China Advanced Ceramic CNC Machining Company - Be-Cu

Manufacturer of precision machined components. Ceramic cnc machining components include high dielectric strength, electrical & corrosion resistance, & non-porous & non-shrinking properties.Manufacturer of high temperature fabricated and machinable ceramics including alumina, glass-ceramic, alumino-silicate, boron nitride and zirconium phosphate. Adhesives, coatings and potting compounds to 3200 degrees F,Air firing services for ceramics up to 1650 degrees C also available. Products include insulators, guides, washers, tubes, blocks, & rods for thermal, electrical, corrosion exposure, structural, wear, & semi-conductor operations. Services include machining to tolerances of +/- .0001, ultrasonic core drilling, centerless grinding, milling, & ID & OD threading.Surface grinding, dicing, OD (outer dia.) grinding, ID (inner dia.) grinding, centerless grinding, hole drilling, jig grinding, lapping, honing & polishing service are also available. Diamond grinding with dimensional tolerances of 5 microns & surface finishes of 0.2 microns (8 micro-in.) can be performed.Blanket orders and AutoCAD files & other 3d files accepted.Contact us for your machining ceramic project!