In this article, we will delve into several machining technologies used for silicon nitride ceramics, exploring their advantages, limitations, and applications.

Thousands of years ago, early human civilizations used ceramics, and archaeologists have also unearthed many ceramic products of different ages. Today in the ...

α-Al2O3 ceramic materials have the advantages of high strength, superior insulation and chemical stability, good dielectric properties, etc., and are widely ...

The properties of the material itself actually determine its application to a large extent. For example, the heat transfer performance of most ceramic ...

Casting Properties of Al-Si Alloys The casting properties of the alloy are not only related to the physical and chemical properties of the metal itself, but ...

The new material industry is an industry that our country is constantly striving to develop rapidly, and it is developing faster and faster in the ceramic ...

The grade and type of alumina ceramic is determined by the percentage of alumina contained in the material, which can vary from 70% to 99.9%. The percentage of ...

Alumina ceramics is a material with alumina (AL2O3) as the main body, which is used in thick film integrated circuits. Alumina ceramics have good conductivity, ...

Aluminum nitride ceramic substrate has excellent thermal conductivity (5-10 times that of alumina self-ceramic), low dielectric constant and dielectric loss, ...

The most fatal disadvantage of zirconia ceramics is brittleness, which leads to low reliability of zirconia ceramic workpieces and also affects the scope of ...

The application of zirconia ceramics has also been gradually developed by people, because zirconia ceramics have high toughness, high flexural strength and ...

If the CNC machine tool is used for milling and grinding, the high precision of aluminum-based silicon carbide machining can be finely controlled, milling and ...

In the last article, we introduced the preparation of boron carbide ceramic powder to you. If you haven’t read this article, you can click: Preparation process ...

From the current point of view, the most commonly used machining methods are mainly to use CNC machine tools with PCD tools for machining.

Forming and Heat Treatment of Silicon Nitride The most common method to form and subsequently sinter silicon nitride is hot pressing with MgO addition; ...

I believe that there are very few machining plants in the country that can process such products, let alone in Dongguan. In Dongguan, only Be-Cu ceramics can ...

The performance of zirconia ceramic materials is very good, but it is also very difficult to process.

Within a certain range, increasing the thermal conductivity of alumina ceramic materials by specific methods will improve its thermal conductivity, thermal ...

In the whole machining process, the silicon-aluminum alloy cavity mainly uses two types of machine tools: grinder and CNC

Be-Cu Ceramics has advanced production equipment and a group of first-class production technical management personnel. The product quality has reached the ...

In recent years, the domestic industrial production capacity has become more and more advanced, and more and more new materials have entered people’s lives. It ...

When it comes to ceramics, I believe everyone is very familiar, but zirconia, a ceramic material, does not appear in many of our daily necessities, and ...

Now they are used more in all walks of life. Zirconia ceramics mainly contain oxygen elements and zirconium elements to form oxides.

Zirconia ceramics are mainly inorganic non-metallic materials sintered at high temperature.

Alumina ceramics can also be called electronic ceramics, wear-resistant ceramics and lighting ceramics.

At present, the main machining factories of ceramic top teeth for chip inserters are concentrated in Guangdong, especially Dongguan and Shenzhen

In the practical application of daily life, we all know that alumina ceramics are a kind of new high-tech ceramics, and we also pay much attention to alumina ...

Be-Cu Ceramics focuses on high-quality alumina ceramic manufacturers, mainly engaged in alumina ceramic manipulators and alumina ceramic semiconductor suction ...

Ceramic molding is an important process link in ceramic production. The more common ceramic machining methods are generally: grinding, polishing, ultrasonic ...

CNC milling and grinding can finely control the machining accuracy of aluminum-based silicon carbide structural parts, milling and grinding, the milling width ...