Two-color injection molding is one of the more popular advanced injection molding methods at present, offering meaningful savings potential and new design ...
Do you want to know about the metal stamping cost calculation for your part? This article will explain all the tips and factors you must know
From August 18th to 20th, 2020, the annual "14th China International Die Casting Industry Exhibition" was held in Shanghai National Convention and ...
etal laser cutting machine is a new type of cutting equipment widely used in industrial production. It gradually eliminates traditional machine tool cutting.
The carbon dioxide laser was first used in 1964 with a wavelength of 10.6 μm. Because this is a very efficient laser, with a conversion efficiency of 10% as a ...
From the analysis of the test data, there is no problem with the blade material and the cutting edge processing angle.
The principle of laser processing is basically the same as that of the convex lens converging sunlight to ignite a match.
Laser Melting(Laser cladding) has the advantages of low dilution rate, small heat affected zone, metallurgical bonding with the base surface, relatively small ...
Laser precision machining and cutting have been applied to precision machining such as solar crystalline silicon cutting, mobile phone panel cutting, ...
Safety and reliability are absolute standards in the automotive industry. In order to ensure the normal operation of laser welding equipment, the operating ...
Over the past two decades, seal-off CO2 lasers have been used in a wide variety of applications, such as packaging, textiles, microelectronics manufacturing, ...
In the laser melting process of polymers, the upper connecting part delivers the laser radiation and is absorbed and melted by the lower part.
Welding metals and alloys with fiber lasers is bringing more new capabilities and greater flexibility to the field, which has led to increased attention from ...
The miniaturized production of the future requires systems that can deliver prototypes, one-offs and small series quickly and efficiently.
The change of different scanning speeds has a significant impact on the quality of the cladding layer.
With the development of laser technology and aluminum alloy development technology, further carry out basic research on aluminum alloy laser welding ...
The latest advancements in laser technology have injected greater capabilities into precision machining, eliminating thermal effects and minimizing ...
In laser melting cutting, the workpiece is partially melted and then the melted material is ejected by means of an air flow.
Laser radium engraving technology has gradually entered people's daily life, such as mobile phone back shell patterns, light switches, plastic buttons in the ...
Whether it is a ship or a reactor vessel, welding is a critical operation in the formation of various reliable metal structures. When a weld fails, the entire ...
Using lasers to interact with substances to process or shape according to certain requirements is collectively referred to as optical manufacturing.
Screws are key parts of injection molding machines and extruders. With the rapid development of the plastic raw material industry, various reinforced and ...
3D vision technology is going mainstream -- and that's a good thing. Technological advancements and cost reductions have made 3D vision a technology that can ...
Bearing defects can arise from various factors, and material defects are indeed one of the significant contributors.
As the backbone of software development, understanding these fundamentals is crucial for programmers and developers to create efficient, maintainable, and ...
The Classification Of Springs According to the nature of the force, springs are divided into: extension springs, compression springs, torsion springs and ...
PLA (Polylactic Acid) is one of the most commonly used materials in 3D printing. It is a biodegradable and environmentally friendly thermoplastic derived from ...
The idea behind green casting is to promote and support eco-consciousness, sustainability, and social responsibility within the industry.
The use of 3D printing technology has been steadily increasing in the automotive sector due to its numerous benefits, such as faster prototyping, design ...
This article explores the reasons behind this trend, the various surface treatment techniques employed, and their positive impacts on the environment.