Glass transition temperature (Tg) is a characteristic temperature at which an amorphous material undergoes a transition from a rigid, glassy state to a ...

When performing a supplier evaluation, there are several key factors to consider to ensure that you choose the right supplier for your business.For ...

Inconsistent molding conditions or improper operation During injection molding, process parameters such as temperature, pressure and time must be ...

Whether you're new to polymer recycling, trying to build your next project, or an engineer, to fully understand the injection molding process, you must first ...

Mold temperature is one of the main control factors in the injection molding process. The recommended mold temperature is from 130 C to 150 C.

Heating Elements are the heart of a hot runner system. For this reason, when you are looking for replacement heaters, cost should not be as important as ...

This article mainly discusses the development status and trends of two-color injection molding, especially focusing on the application of automotive lamps.

Do you want to know about the metal stamping cost calculation for your part? This article will explain all the tips and factors you must know

From August 18th to 20th, 2020, the annual "14th China International Die Casting Industry Exhibition" was held in Shanghai National Convention and ...

Metal laser cutting machine is a new type of cutting equipment widely used in industrial production. It gradually eliminates traditional machine tool cutting.

The carbon dioxide laser was first used in 1964 with a wavelength of 10.6 μm. Because this is a very efficient laser, with a conversion efficiency of 10% as a ...

From the analysis of the test data, there is no problem with the blade material and the cutting edge processing angle.

The principle of laser processing is basically the same as that of the convex lens converging sunlight to ignite a match.

Laser Melting(Laser cladding) has the advantages of low dilution rate, small heat affected zone, metallurgical bonding with the base surface, relatively small ...

Laser precision machining and cutting have been applied to precision machining such as solar crystalline silicon cutting, mobile phone panel cutting, ...

Safety and reliability are absolute standards in the automotive industry. In order to ensure the normal operation of laser welding equipment, the operating ...

Over the past two decades, seal-off CO2 lasers have been used in a wide variety of applications, such as packaging, textiles, microelectronics manufacturing, ...

In the laser melting process of polymers, the upper connecting part delivers the laser radiation and is absorbed and melted by the lower part.

Welding metals and alloys with fiber lasers is bringing more new capabilities and greater flexibility to the field, which has led to increased attention from ...

The miniaturized production of the future requires systems that can deliver prototypes, one-offs and small series quickly and efficiently.

The change of different scanning speeds has a significant impact on the quality of the cladding layer.

With the development of laser technology and aluminum alloy development technology, further carry out basic research on aluminum alloy laser welding ...

The latest advancements in laser technology have injected greater capabilities into precision machining, eliminating thermal effects and minimizing ...

In laser melting cutting, the workpiece is partially melted and then the melted material is ejected by means of an air flow.

Laser radium engraving technology has gradually entered people's daily life, such as mobile phone back shell patterns, light switches, plastic buttons in the ...

Whether it is a ship or a reactor vessel, welding is a critical operation in the formation of various reliable metal structures. When a weld fails, the entire ...

Using lasers to interact with substances to process or shape according to certain requirements is collectively referred to as optical manufacturing.

Screws are key parts of injection molding machines and extruders. With the rapid development of the plastic raw material industry, various reinforced and ...

3D vision technology is going mainstream -- and that's a good thing. Technological advancements and cost reductions have made 3D vision a technology that can ...

Bearing defects can arise from various factors, and material defects are indeed one of the significant contributors.